StarLinerIR

---

Description

The StarLinerIR is an infrared (IR) devboard with 8 IR LEDs, 4 of them are enhanced for an outstanding range improvement. The LEDs are a combination of the usual infrared wavelengths used in most devices: 850nm and 940nm.

The enhanced IR LEDs are rated at 0.5W each, this way the IR beam gets enough power to reach long distances without harming Flipper battery due to high power draw.

The boarf comes with a switch to power a white LED that can be used as a mini flash light.

Main features of this VoyagerRF Pro version:

• ⚡️ Long range: The IR beam created by the 8 LEDs increase the range from the inbuilt IR led in the Flipper.
• ⚡️ Mini flashlight: The board comes with a switch to light up an status white LED that can be used as a mini flashlight.
• ⚡️ Manually soldered and tested, I like to solder, so I prefer to build it myself to maximize quality.
• ⚡️ Flat fit, for optimal form factor. It’s mounted horizontally, wide enough for easy removal.
• ⚡️ 3D Printed case: For people looking for a clean look, I designed a case to store and carry your StarLinerIR everywhere.

Here you have more photos:

Front:

Back:

---

Bundles and Boards

If you are interested in getting the board and other accessories, you can contact me on my email kashmir_54@hotmail.com and I will get back to you!

StarLinerIR / 40€

PCB available in black or white with gold plated details (ENIG) and 3D cases in black, white, lime green, light orange (PLA+) and translucent (PETG).

Includes:

• StarLinerIR board
• 3D PLA+ front + base to protect the board (front can be removed)

Extra base / +7€

If you can’t decide the 3D base color and you don’t have a 3D printer, you can add an extra 3D covers colors: Black, white, lime green, light orange and translucent.

Includes:

• Front and base covers (PLA+/PETG)

---

3D case files

You can download the STL for the cases and the base here:

Part	File
Front Case	StarLiner_Case.stl
Base	StarLiner_Base.stl

To mount it you will need:

• 2x M1.4 screws (10mm or 12mm long)
• 2x M1.4 Brass Insert Nuts

---

Showcase

Youtube video TBA

DISCLAIMER: These tutorials and information are solely for educational purposes and not an intended use of the device. Test on your own environment and with your own gear.

Thank you for reading and for your interest in the board. I hope you enjoyed this project as much as I did!